Ocean Blue Glass

Legal

Terms & Conditions

Sale, supply and installation | Last updated 16 November 2026

These terms apply to quotations and orders from Ocean Blue Glass (ABN 98 112 601 939). In these terms, “we”, “us” and “our” refer to Ocean Blue Glass. “You” means the customer named in the quotation.

Your agreement consists of these terms as provided before acceptance, your accepted quotation, the agreed specifications and drawings, any agreed written variations and any applicable building contract documents. Mandatory legislation takes precedence. Your rights under the Australian Consumer Law (ACL), applicable state building legislation and any other law that cannot be excluded continue to apply.

We carry out work in accordance with applicable legislation, the National Construction Code where applicable, and Australian Standards relevant to the job. These may include AS 1288 for glass selection and installation, AS/NZS 2208 for safety glazing materials, AS/NZS 4667 for cut to size and processed glass, and AS 3740 for domestic wet area waterproofing where relevant to the work. We refer to relevant Australian Glass and Window Association technical guidance where appropriate. The Ocean Blue Glass Cleaning & Maintenance Guide and any product specific care instructions we supply explain how to look after your products.

1. Quotations and pricing

Our initial on site measure and quote is free. Quotations are valid for 30 calendar days from issue unless a different period is stated. Prices are in Australian dollars and include GST where applicable.

A quotation is based on the scope, selections, measurements and site conditions known when we prepare it. An estimate based on photos, plans or dimensions you supply may need confirmation after a site measure. If an unforeseen condition or requested change affects the agreed scope, we will discuss it with you and obtain written approval for any priced variation before the additional work proceeds, in accordance with applicable law.

Unless the quotation includes them, plumbing, electrical work, tiling, waterproofing, painting, plastering, structural repairs and making good of existing surfaces are outside our scope.

2. Accepting a quotation

You may accept through Quotient, in writing or by another method we agree to, subject to any legal signing requirements. Review the products, scope, finishes, quantities, specifications and drawings before accepting. If you accept for someone else, you must have authority to do so.

We will give you access to the applicable version of these terms before acceptance. After acceptance and receipt of the required payment, we arrange any final measure and removal included in the agreed scope as needed. We release the order for manufacture once the necessary dimensions and selections are confirmed and applicable legal requirements are satisfied.

3. Deposits and payment

3.1 Supply and installation. Our standard deposit is 50% on acceptance where lawful. The balance is payable on or before the day of installation under the applicable payment schedule. If a law requires a lower deposit, payment at completion or a different schedule, we will set out the lawful amounts and due dates in the quotation or required contract before acceptance. A different lawful schedule may also be agreed in writing.

3.2 Supply only. Payment in full is due on acceptance where lawful. We begin ordering, processing or manufacture once payment is received and any applicable legal requirements are met.

3.3 Pay by the method stated in the quote or invoice. We will disclose any applicable lawful surcharge. If you dispute an amount, tell us promptly and explain why. Undisputed amounts remain payable when due, subject to any statutory withholding rights.

3.4 If payment is overdue, we may suspend work or postpone delivery or installation where permitted by the agreement and law, after giving any required notice. Reasonable debt recovery costs may be recovered where expressly agreed and legally recoverable.

4. Cancellations and order changes

4.1 You may cancel for change of mind by giving us written notice within 24 hours of accepting the quotation, provided work on the accepted order has yet to commence. Email is acceptable. Work commences when materials are ordered or procurement, final measuring, fabrication or other agreed job work begins. General office processing of your acceptance alone does not count as commencement.

4.2 After 24 hours or once work commences, whichever comes first, change of mind cancellation is available only if we agree in writing or the law gives you a cancellation right. After production begins, order changes require our written agreement and your approval of any resulting price and timing changes. Custom made products are made for your project and may be unsuitable for resale.

4.3 For a voluntary cancellation we may deduct reasonable, documented costs actually incurred in preparing and processing the accepted order, where the charge or its basis was disclosed and agreed before acceptance and is legally recoverable. These can include post acceptance administration, manufacturing specifications, additional measuring, supplier charges and materials or labour already committed where applicable. The original free measure and quote stays free. We will account for costs saved or recovered, avoid double charging and return the refundable balance.

4.4 Mandatory cooling off, termination and refund rights apply regardless of when work begins. If you exercise a statutory right, deductions and refund timing are governed by the applicable law.

5. Storage and customer delays

5.1 We will notify you in writing when custom made products are ready. If you need to delay collection, delivery or installation, contact us to agree how long we will hold them and to arrange a new date, subject to availability and site readiness.

5.2 Reasonable storage charges may apply case by case where you cause or request the delay. If we propose a charge, we will give you the amount or calculation method in writing and obtain your agreement before charges begin. There is no automatic weekly charge. Reasonable additional handling, transport or rescheduling costs directly caused by the delay may also apply if agreed in advance. Charges apply only where lawful and for delays attributable to you.

5.3 If your delay continues for more than 28 calendar days after we give written notice that the goods are ready, the outstanding balance becomes payable where expressly agreed in your payment schedule and permitted by law. Otherwise, we may invoice only for amounts lawfully due at that stage under that schedule. Payment leaves our remaining delivery or installation obligations in place. We handle uncollected goods in accordance with applicable law and required notices.

6. Site readiness and access

Provide safe and unobstructed access for the agreed appointment. Tell us about known hazards, concealed services, fragile finishes, access restrictions and substrate or waterproofing concerns. Relevant tiling, waterproofing, flooring, wall linings and cabinetry should be complete before final measuring or installation unless we agree otherwise.

We may postpone work if access is unavailable or conditions prevent safe or compliant installation. Reasonable costs for an extra visit, remeasure or rescheduling due to your delay may apply if disclosed and agreed in advance and permitted by law. You arrange preparation by other trades unless the quotation includes that work.

7. Final measurements and site changes

We measure against the finished surfaces present at the final measure. Tell us before any change to tiling, floors, walls, framing, cabinetry or adjoining surfaces that could affect the fit. If a change requires a new visit or replacement materials, we will agree the variation with you before proceeding.

For supply only products made to dimensions you or your installer provide, you are responsible for the accuracy of those dimensions. We remain responsible for measurements we take and for manufacturing to the agreed specifications.

8. Removal of existing glass and fixtures

Removal and disposal apply where included in the quotation. We take all reasonable care when removing existing glass and fittings. Bonded or fixed items may expose holes, marks, loose tiles, damaged finishes or concealed defects. Even with careful removal, the way an item was fixed or the condition of adjoining materials may cause unavoidable damage to tiles, grout, waterproofing, paint, cabinetry or walls.

To the extent permitted by law, responsibility for pre existing damage and unavoidable damage arising from careful removal rests with the customer. We remain responsible for damage caused by a failure to exercise due care and skill. Making good, retiling, waterproofing and similar repairs are outside the quoted scope unless included. If unexpected conditions arise, we may pause the affected work and agree the next steps with you.

9. Glass specifications and tolerances

Glass and hardware can show variations in reflected images, colour, finish and optical appearance, including roller wave in toughened glass. Appearance can vary with lighting, viewing angle, substrate and production batch. Samples and images guide selection. We assess glass quality, clearances, alignment and appearance against the agreed specifications, applicable standards and consumer guarantees.

10. Toughened glass and spontaneous breakage

Toughened safety glass can occasionally fracture without obvious impact. Possible causes include nickel sulphide inclusions, edge damage, impact, installation stress and building movement. The absence of obvious impact alone does not establish the cause. We assess breakage on the available evidence, including whether a covered defect or a failure to meet a consumer guarantee is involved.

Where suitable and available, you may request heat soak tested toughened glass before manufacture, at the price quoted. Heat soak testing can reduce the risk of breakage from nickel sulphide inclusions, although some risk remains. We provide required safety glazing and heat soak testing where required by law or applicable standards. Keep clear of fractured or unstable glass and contact us if your product breaks.

11. Shower screens and water containment

  • Shower screens are designed to contain water during normal use. Frameless, sliding and open entry designs may have clearances required for operation and may allow some water to escape, particularly with direct spray towards gaps. Showerhead position, water pressure, floor falls, layout, plumbing and existing waterproofing can affect performance.

We remain responsible for our design, manufacture and installation obligations. Problems caused solely by defective plumbing, existing waterproofing or other work outside our scope are outside our responsibility to the extent permitted by law. Clean and maintain the seals, silicone and hardware in accordance with the care instructions we provide.

12. Mirrors and glass splashbacks

We make mirrors and splashbacks to the approved dimensions and finishes. Proper adhesion and performance depend on suitable substrates and site conditions. Existing moisture, defective waterproofing and chemical exposure can affect mirror backing, painted finishes and adhesives. Follow the supplied care instructions and check suitability before applying films, fittings or adhesives.

Where replacing window glass, our scope is the glazing and associated work stated in the quote. We will tell you if the condition of the existing frame or glazing system affects whether we can install compliant replacement glass.

13. Sliding wardrobe doors

We make doors to the approved opening size and configuration. Keep tracks and rollers free of debris. Stop using a door if it jams or its mechanism is visibly damaged. Floor changes, building movement and changes to the opening can affect alignment.

For supply only orders, the party installing the doors is responsible for its installation. Our responsibility for the product, agreed specifications and supplied instructions remains subject to applicable warranties and consumer guarantees.

14. Product warranties

Our warranties against defects cover residential use for the following periods.

  • Shower screens, including glass, frames and supplied hardware: 3 years.
  • Glass splashbacks, including painted and mirrored splashbacks: 3 years. The mirror component has the 1 year mirror warranty.
  • Sliding wardrobe doors, including frames, door assembly, tracks and rollers: 3 years. The mirror insert has the 1 year mirror warranty.
  • Standalone mirrors and mirror components: 1 year.

For installation by us, the warranty period begins on completion of installation. For supply only, it begins on collection or delivery. The defect must appear during the applicable period. These warranties cover defects in materials and manufacture, and defects in installation workmanship where we installed the product. The 3 year workmanship period for a splashback or wardrobe door applies to our installation of the system, including its mirror component.

For a covered defect, we will repair or replace the affected product or component or rectify our installation as appropriate at our expense. You may have additional or different remedies under the ACL. Any separate manufacturer warranty identified in your order is additional to your rights against us.

The voluntary warranty excludes ordinary wear and damage to the extent caused by accidental impact, misuse, excessive force, unsuitable cleaners, inadequate maintenance, debris, flooding, unsuitable conditions, building movement, alterations or incorrect third party installation. It also excludes deterioration caused by moisture or salt exposure, such as black edges, desilvering, corrosion or pitting, where the exposure caused the problem independently of a covered defect. We assess actual cause, including material and installation defects. Silicone, seals, hinges, rollers, finishes and coatings are covered for applicable defects. Ordinary wear and routine maintenance are excluded. Sections 15 and 16 explain care and claims.

15. Cleaning and coastal maintenance

Follow the Ocean Blue Glass Cleaning & Maintenance Guide and any product specific instructions we give you. Clean glass and hardware regularly, keep tracks clear, and use products suitable for the relevant glass, coating, finish and fittings. Avoid abrasive cleaners, harsh chemicals and tools that could scratch or damage surfaces. Keep mirror edges clean and dry. Seals, silicone and moving parts may need periodic inspection, maintenance or replacement with normal use.

Near the coast, clean exposed fittings and finishes more often to remove salt deposits. Salt and moisture can contribute to staining, pitting or deterioration. A maintenance issue affects voluntary warranty coverage only to the extent it caused the problem. Statutory rights continue to apply.

16. Warranty claims and expenses

Contact Ocean Blue Glass using the details in Section 21 as soon as reasonably practicable after noticing a defect. Email is preferred. Include your name, site address, order or invoice reference if available, a description and any photos or video you can safely and reasonably provide. You can also call or write to us. We can assess claims without photos or video where these are unavailable.

We may ask for reasonable evidence of purchase or arrange an inspection. We will explain the assessment and the remedy available. Contact us before engaging another repairer where reasonably possible. Take any urgent steps reasonably necessary to protect people or prevent further damage.

We pay for inspection and reasonable costs of providing the remedy for a covered defect, including required transport, collection, removal and reinstallation as applicable. We reimburse reasonable, necessary expenses incurred in making a valid warranty claim. Send or give us the details and available receipts so we can assess and reimburse them. Where an inspection finds no covered defect or statutory failure, a reasonable inspection fee may apply only if we gave an estimate and you agreed before the visit, and the fee is lawful. Statutory remedies are available without an upfront inspection fee.

17. Production and installation scheduling

We give estimated production and installation timeframes in good faith. Once your order has been quality checked, we contact you to agree a suitable installation day and time. Supplier or processing delays, weather, changed site conditions and access can affect timing. We will advise you of material delays, take reasonable steps to minimise them and comply with any agreed dates and applicable legal requirements.

18. Ownership and unpaid goods

Where a valid retention of title arrangement applies, ownership of supplied goods remains with us until payment in full. We deal with risk and delivery in accordance with the agreed arrangements and applicable law. Any recovery action must be lawful. These terms give us no automatic right to enter premises or remove installed goods.

19. Responsibility for existing conditions

We exercise due care and skill and remain responsible for our products, services and workmanship as required by law. To the extent permitted by law, responsibility for damage caused solely by pre existing structural defects, leaks, defective waterproofing, later building movement or other trades rests with the party responsible for that cause. If several factors contributed, responsibility is determined from the circumstances and applicable law.

20. Australian Consumer Law

Our voluntary warranties are in addition to your other rights and remedies under the law in relation to the goods and services. Those rights can continue after a voluntary warranty period ends.

Goods and installation services

Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled:

  • to cancel your service contract with us; and
  • to a refund for the unused portion, or to compensation for its reduced value.

You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.

Goods only

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Services only

Our services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled:

  • to cancel your service contract with us; and
  • to a refund for the unused portion, or to compensation for its reduced value.

You are also entitled to be compensated for any other reasonably foreseeable loss or damage. If the failure does not amount to a major failure you are entitled to have problems with the service rectified in a reasonable time and, if this is not done, to cancel your contract and obtain a refund for the unused portion of the contract.

21. Contact details and resolving concerns

Ocean Blue Glass

ABN 98 112 601 939

Phone 07 5523 3245

Email sales@oceanblueglass.com.au

Website www.oceanblueglass.com.au

Contact us about an order, issue, warranty claim or privacy concern. We will make reasonable efforts to resolve the matter directly. You can also contact the relevant NSW or Queensland regulator or use any available court, tribunal or other dispute resolution process.

22. General conditions

Any special conditions and variations must be agreed in writing and comply with applicable law. These terms work together with any mandatory building contract and related documents required for your project. If a provision is unenforceable, the remaining provisions continue to apply to the extent permitted by law. A website update applies to future agreements and does not change the version you accepted.

23. Privacy policy

Information we collect. When you enquire, ask for a quote or place an order, we may collect your name, email, phone number, site address, job details, correspondence and records of your quotation, order and payment. You can choose to provide photos or plans. We may also collect information when you ask for after sales support or make a warranty claim.

How we use it. We use your information to respond, arrange a measure, prepare and manage quotations, supply or install products, administer payments and job records, handle claims and meet legal obligations. We ask for permission before using identifiable photos of your property for marketing.

Service providers. We may share information as needed with providers that host our website, process enquiries, manage quotes, handle communications or process payments, and with suppliers or delivery providers where needed to fulfil an order. This includes Quotient, which we use to prepare, send and manage quotes. We may disclose information where required by law.

Storage and retention. We take reasonable steps to protect your information from unauthorised access, loss and misuse. We keep records for as long as reasonably needed to deal with your enquiry or order, provide after sales support, or meet legal and record keeping obligations.

Website cookies. The website may use cookies and similar technologies to support site functions. Your browser settings allow you to manage cookies. Changes to these settings can affect how some features work.

Access, corrections and complaints. To ask what information we hold about you, request a correction or raise a privacy concern, contact us using the email or phone details in Section 21. We may confirm your identity before sharing personal information. We will review your request or concern and respond within a reasonable time.