Ocean Blue Glass

Shower Screen Maintenance: Keep Your Glass Clear and Stop Leaks

How to clean and look after your shower screen, spot etched glass, care for hinges and seals, and know when it is time for a replacement.

Ocean Blue Glass Insights

Shower Screen Maintenance: Keep Your Glass Clear and Stop Leaks

January 2026 · 4 minute read · By the Ocean Blue Glass team, trusted since 2003

Wiping a frameless glass shower screen with a soft microfibre cloth

Looking after your shower screen keeps your bathroom fresh and helps stop leaks before water reaches your floor. A regular wipe removes everyday soap scum and body oils, but cleaning can’t fix everything. Hard water minerals can slowly etch unprotected glass, and door seals wear out with age. When that happens, a new custom made screen is often the simplest fix, and our shower screens Gold Coast team can help.

The routine that keeps your glass clear

You don’t need to spend hours scrubbing. Water droplets and soap left to dry will leave white spots, so a few simple habits make all the difference.

After each shower: squeegee

This is the single most effective habit. A quick pass with a squeegee takes about 20 seconds and removes the water before it can dry and leave residue behind. Keep one hanging in the shower so it’s always within reach. If you do nothing else on this list, do this.

Using a squeegee to clear water from shower screen glass after a shower

Once a week: mild detergent and a microfibre cloth

Wipe the glass with a damp microfibre cloth and a little mild detergent, such as ordinary dishwashing liquid, then rinse and squeegee dry. That’s enough to lift the week’s soap and body oils before they build up. For extra shine, diluted white vinegar works well on the glass itself.

For built up film: a bit more patience

If the glass is already cloudy, let a mix of warm water and dishwashing liquid, or diluted white vinegar, sit on the glass for a few minutes to soften the residue. Then work it off with a non scratch sponge or microfibre cloth, rinse well and dry. Glass that hasn’t been cleaned for a while may need this a couple of times.

A few more tips

  • Never use scouring pads or abrasive powders. They leave fine scratches that hold onto dirt.
  • Rinse soap off completely. Body wash and shampoo leave a film that mixes with minerals and hardens over time.
  • Let the steam out. Open a window or run the exhaust fan after your shower.

Keep vinegar and other acidic cleaners off natural stone and away from frames, hinges and handles. Acids can wear away the protective finish and leave hardware looking pitted long before the glass wears out.

Is it dirty or etched? A quick test

If your glass still looks cloudy after a good clean, the problem may not be dirt. Over time, hot water and minerals can damage the surface of untreated glass and trap stains in the glass itself.

  1. Clean the cloudy area with warm soapy water.
  2. Spray it with clean water.
  3. Look closely while it’s wet. If the glass looks clear, it’s surface build up you can still clean off. If the haze is still there under the water, the glass is etched.

Etched glass can’t be fixed with cleaners or scrubbing because the surface itself is damaged. Don’t try to polish or grind it out yourself.

Looking after hinges, rollers and seals

Hinges, rollers, seals and door sweeps work hard every day, and when they fail, water ends up on your floor.

Cleaning a brushed nickel frameless shower screen hinge with a soft cloth
  • Keep hinges and rollers free of build up. A light spray of non greasy silicone lubricant keeps them moving smoothly.
  • Rinse sliding tracks with clean water to clear away hair and soap.
  • Avoid heavy oil sprays on moving parts. They attract dirt and can break down rubber seals.
  • Check the bottom door sweep. These strips harden, split or grow mould over time.
  • Know when a seal is finished. Mildew on the surface wipes off, but mould inside the rubber means it needs replacing. A failed seal lets water run straight onto the floor.
Worn and discoloured bottom door seal on a frameless shower screen

When cleaning isn’t enough

Old fully framed screens have deep tracks and channels that trap moisture, grime and mould where a brush can’t reach. Replacing an old screen with frameless shower screens or Slimline semi frameless shower screens removes most of those tracks.

At Ocean Blue Glass, our frameless shower screens use 10mm toughened safety glass, and our Slimline semi frameless shower screens use 6mm toughened safety glass with minimal framing. A new screen replaces etched glass and worn seals and refreshes your bathroom without a full renovation.

Shower screen replacement on the Gold Coast, Tweed Heads and Byron Bay

If your screen stays cloudy however much you clean it, or worn seals keep leaking, it may be time for a replacement. At Ocean Blue Glass, our own team measures and installs custom shower screens across the Gold Coast, Tweed Heads and Byron Bay. Contact us to book your free onsite measure and quote.